E-alert
任俊杰. 8180型多道测量系统参数最优选择的探讨[J]. 分析测试技术与仪器, 1995, (1): 57-60.
引用本文: 任俊杰. 8180型多道测量系统参数最优选择的探讨[J]. 分析测试技术与仪器, 1995, (1): 57-60.
shu
Ren Junjie. A Study on Parameter Optimization of 8180 Model MCA Measuring System[J]. Analysis and Testing Technology and Instruments, 1995, (1): 57-60.
Citation: Ren Junjie. A Study on Parameter Optimization of 8180 Model MCA Measuring System[J]. Analysis and Testing Technology and Instruments, 1995, (1): 57-60.
shu

8180型多道测量系统参数最优选择的探讨

A Study on Parameter Optimization of 8180 Model MCA Measuring System

    摘要
  • 摘要: 本文针对美国CANBERRA公司产8180型多道分析器组成的多道测量系统的主要参数对所测谱的影响进行了探讨.通过对能量为0.66-1.33MeV的γ射线和能量为0.48-1.O5MeV的电子能培的半高宽、谱峰道位及谱峰计数的测量,获得了有关能谱半高宽、谱峰道位和谱峰计数对测量系统主要参数(主放大器放大倍数和主放大器整形时间)响应的大量数据,在对这些数据分析的基础上,给出了该测量系统主要参数的最佳选择范围和最佳选择值.

     

    Abstract: The influence of parameters of 8180 model MCA measuring system on energy Spectra measure was studied. By measuring the full width at half-maximum(FWHM),the position and count of peak in the energy spectra of γ-ray with energy range from 0.66MeV to 1.33 MeV and electron beam with energy range from 0.48MeV to 1.05 MeV,a great number of data in answer to amplifier gain and shaping time were obtained. Based on these data,optimum measuring parameters of the MCA system were proposed.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回